Hi I'm seeking a little guidance, my clutch has come loose again and after cleaning and reassembling I cannot tighten the sleeve nut C20 without it locking the clutch solid, not C13 and the shoe assembly which is still free to rotate back and forth but C3, so it turns the engine over, I think it has been like this since I've had it but would like to fix it properly.
It seems to me this must be either the bushes in the chainwheel have flanges that are too thick or the back of C3 is worn, it is very shiny.
Are these the only possibilities.
It seems to me this must be either the bushes in the chainwheel have flanges that are too thick or the back of C3 is worn, it is very shiny.
Are these the only possibilities.