Misc: Charging Systems Chinamo over charging.

[hrdsuper90]

I have a brand new Chinamo stored (not sure if I'll use it) but are different clamps required if I do ? I think the Spares Co had them back in the day they supplied Chinamos but no more.

 

[Robert Watson]

I have a brand new Chinamo stored (not sure if I'll use it) but are different clamps required if I do ? I think the Spares Co had them back in the day they supplied Chinamos but no more.

I also have a new one on the shelf but no home for it yet.
They are about 1/8 in bigger in dia so a new ET202(?) is required I made one for the other one I used, not really a hard job on the lathe. 3 1/2 in OD and then offset the piece and bore eccentric and then band saw a longitudinal slot. OR take an ET202 and bore it out!. Mine have both come with the appropriate straight bore hub for attaching the sprocket so haven't had to make that.

 

[john998]

Hello, If you have the earlier twin crank case you only have to bore the eccentric adapter to 80mm. John.