• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Burman Gearbox


Forum Website User
VOC Member
Can anyone tell me how the gear indicator pointer is held on the Burman gearbox and how is it removed to replace the gear change lever? I know it must be simple but I can't see anything obvious.

Ken Tidswell

Well Known and Active Forum Website User
VOC Member
This held by the peculiar shaped bolt in the end of the gear change shaft it is threaded 1/4 bsf. Attack it with a suitable adjustable spanner by turning anti- clockwise. It should then fall off in you hand
Warning! This thread is more than 15yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Photos from the 2022 North American Rally

Photos from the 2022 Annual Rally

Photos from the 2022 French Rally