• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Battery Earth Lead

Shanghai

Well Known and Active Forum Website User
VOC Member
Can someone let me know if there is a standard location for eathing the battery lead on a series c Rapide?
Thanks Tony
 

john998

Well Known and Active Forum Website User
VOC Member
Hello, let hand side of UFM near the spring box mount. 1/4 BSF hole. John.
 

chankly bore

Well Known and Active Forum Website User
Non-VOC Member
While you're at it Fit a removable rubber boot over your live battery terminal and run an earth from your headlamp to the UFM,either to the location suggested or under the FT183 cable clip at the front of the UFM with a nice external tooth shakeproof washer to grind away the paint.
 
Warning! This thread is more than 13yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Photos from the 2022 North American Rally

Photos from the 2022 Far Far North Rally

Photos from the 2022 Annual Rally

Photos from the 2022 French Rally


Top