Thanks Peter for pointing out my BSF / BSP typo error which I have just edited on the original post to avoid any confusion.
Simon
Simon
Dear Michel,Dear Simon,
I still don't understand. If A48/1 (3/8 ") is the bore of the A66AS/1 oil feed rubber hose (of course 3/8"), the pump-side union banjo must also be 3/8" and therefore cannot be the A48 which is for the bored rubber hose 5/16 ".
Where is the error ?
Dear Simon,
I still don't understand. If A48/1 (3/8 ") is the bore of the A66AS/1 oil feed rubber hose (of course 3/8"), the pump-side union banjo must also be 3/8" and therefore cannot be the A48 which is for the bored rubber hose 5/16 ".
Where is the error ?
Dear Michel,Dear Delboy, dear Simon,
And so contrary to what is mentioned inthe Alternative Spare List Serie A, there are three union banjos A48/1 or A29 (3/8 "), one for A58AS oil return hose (3/8") and two A66AS/1 oil feed hose (3/8"). Did I understand correctly and is this correct ?
Dear Michel,Dear Delboy,
So there is an inversion of reference in the Alternative A.
A58AS is the 3/8" oil feed hose with the single A48/1 union banjo (or A29) on the oil pump. A66AS/1 is the 5/16" return hose with two A48 union banjo (plus two A48 for the OP pump cylinder hose 5/16 "too).
Did I finally get it ?
Regard.
Michel.