• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

Amal 932 jetting for 1200 Twin

DMCram

New Forum Website User
Non-VOC Member
I would appreciate some recommendations on pilot jet, main jet and needle sizes for my 1200 twin, which has Amal Mk1 932 carbs, Eric Kruse cams (don't know what these are exactly), twin plug heads, and a medium open exhaust (loud but not really loud). I am thinking 35, 250, 106??
 

Howard

Well Known and Active Forum Website User
VOC Member
Hi

You're in the right ballpark - I'm on 30, 240, 107 on a 1000, not far off, but still fettling (I think my main is a bit small). It's very much "suck it and see" but that looks like a good starting point.

H

ps This is a very good owners club to join.
 
Warning! This thread is more than 12yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top