• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

alton regulator

1660bob

Well Known and Active Forum Website User
VOC Member
Hi All, I see that Altons are now supplied with a new type of regulator which dispenses with the need for an isolating switch .My Alton is new, but an older type with the older regulator. I am about to wire it in to the loom, and contemplating a switch. To avoid the hassle,is there a straight swap for the new type regulator? I believe its a Podtronics unit, is it a standard shelf item, or a one off for the Alton? Bob.
 

vibrac

Well Known and Active Forum Website User
VOC Member
Just had a new Alton fitted to the Egli Ben is rebuilding and refurbishing sat all weekend in Cadwell paddock after track day and never dropped a volt so the internal switch off works
 
Warning! This thread is more than 9yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top