Adapter plate for regulators

[Edwin Saxton]

I need an adapter plate in order to fit a Podtronics regulator in the same position as a Miller regulator would fit on a Twin. Any ideas chaps?

 

[bmetcalf]

Apologies for the grime, but it is an aluminum bar with countersunk holes and tubular aluminum spacers for the dynamo clamp screws offset from through holes for the reg screws.

 

[roy the mechanic]

Here's what I did, take a peice of 5/16 (8mm) alloy plate, shape it to suit the base of the new reg. drill to suit the holes in the dynamo clamp, you have a choice here- either countersink the holes so the fixing screws sit flush with the top surface, or using a suitable milling cutter so the allen bolts sit flush . Align the reg to the mountin adaptor, drill + tap according, bolt=on, rewire according, Roy.

 

[Bazlerker]

I took a piece of 1" thick aluminum, drilled 4 holes, 2 countersunk on top, 2 countersunk on the underside..