What are you all now using for the A65AS supply line hose? I thought I had enough herringbone style A65 but the piece I have is about 2" too short. Funny situation in a number of ways: The parts list says A65AS is supposed to be 3/8 ID x 9 inches. In addition to requiring about 11 inches, the 25 year old but never used supply pipe A66AS that I am using is .470 OD, the original 1948 A44S at the other end is .435, and I have a very beat up original A66AS that is .445. The 9 inch long herringbone hose I was planning to use is not 3/8 ID, it is .430, or closer to 7/16. It came with matching ferrules and fits OK but as I said, it is too short. I just bought a piece of 3/8 herringbone and there is no way it will go over the A44S, let alone the .470 A66AS. What are the correct ID/OD sizes for these parts and where is the best place to find some? 7/16 hose doesn't seem to be an option that I can find.
Thanks,
Ron
Thanks,
Ron