• Welcome to the forum website of the Vincent H.R.D. Owners Club.

    Should you have any questions relating to the Vincent H.R.D. Owners Club, or Vincent H.R.D. motorcycles in general, please contact Graham Smith, Online Forum Webmaster by calling 07977 001 025 or please CLICK HERE.

    You are unrecognised, and therefore, only have VERY restricted access to the many features of this forum website.

    If you have previously registered to use this forum website, you should log in now. CLICK HERE.

    If you have never registered to use this forum website before, please CLICK HERE.

2 start oil pump

tractorman414

Well Known and Active Forum Website User
VOC Member
Hi

thoughts about 2 start oil pumps.

Installed to increase flow to big end and camshafts at higher revs.

Should one modify the crankshaft quill etc to increase the flow through to the big ends, otherwise would the benefit be lost through the operation the pressure relief system diverting the oil away?

is there a risk of over oiling the bores ?
 

clevtrev

Well Known and Active Forum Website User
VOC Member
My view, is there is nothing wrong with the standard pump for the big end. All I suggest is to make sure the oil gets away fast from the big end.
 

ogrilp400

Well Known and Active Forum Website User
VOC Member
Increase in Oil Supply

It might be a 100% increase in supply but I do not believe that the oil ways are overly restrictive. I have covered 177,000 miles on a two start pump and all is working quite well.

Phelps.
 
Warning! This thread is more than 14yrs ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Top