Had a problem removing outer race from hub, even with heat. This is a wheel built 8 years ago with a set of W5413 bearings and aluminum spacers. Actually i found 09195 races with w5413 cones.
Anyway, trying get races and spacers out to install a bearing set to accommodate VSM friendly bearings.
Unable to get to a TIG shop, i came up with another method of carving a slot in the race using a Dremel with a cutoff wheel, sticking a screwdriver in the slot , then tapping the slotted screwdriver from the other side with socket /extension.
Never know which way photo will post.